Automatic Genset Controller with Transfer Switching

Automatic Mains Failure Unit, CanBus J1939 ECU communication, Multi language selections, USB communication, Speed sensing from Magnetic Pickup, Alternator frequency and CanBus ECU, Statistic Records, Generator phase sequence control, Programmable weekly working permit calender, Exercise at programmed time intervals

Specifications
CanBus	J1939 ECU Communication
LCD Languages	English/Chinese, English/Deutch, English/Turkish, English/Italiano, English/Espanol, English/Francais, English/Russian
Event Logs	Last 50 events with measured values
Inputs	3x Configurable digital, 3x Analogue senders, Magnetic Pickup, Charge Alternator D+(WL) inputs
Outputs	Configurable 4x Transistors, MBR and GBR outputs
Current Measurement	1 phases CT inputs for Load Current, 1x CT input for Earth Current
Voltage Measurement	3 phases for Mains, 1 phases for Alternator
Power Factor Measurement	For 1 phases
Case
Dimensions	111mm x 81mm x 61mm
Panel Cut-Out	81mm x 70mm
Protection	NEMA 4X IP65 at front side
Weight	Approximately 0,3Kg
Ratings
DC Battery Supply range	8 to 32Vdc, max.operating current is 360mA
CT Secondary	5A
Sender Measurement	0 to 1300 ohm, accuracy: 1%FS, resolution: 1 ohm
Cabin.Temp.Measuremet	-50 to +100 ºC, accuracy: 1 % FS, resolution: 1 ºC.
Operating / Storage Temp.	-20°C to +70°C / -30°C to +80°C
Product Options
Trans-MiniAMF	Automatic Genset controller with transfer swiching
Trans-MiniAMF.CAN	Automatic Genset controller with transfer swiching,CanBus J1939 communication
Trans-MiniAMF.MPU	Automatic Genset controller with transfer swiching,speed sensing from Magnetic Pickup
Quality Certificates
	CE, GOST-R