EMKO Trans-MiniAMF Automatic Genset Controller with Transfer Switching
SPN _ FMI and OC values reading from engines via J1939 Speed sensing from alternator voltage or magnetic pickup Power factor measurement for 1 phases EMKO Automatic Mains Failure Unit Generator Control Devices Remote Start _ Stop _ Speed and Idle mode control via J1939
EMKO Trans-MiniAMF Automatic Genset Controller with Transfer Switching
CanBus J1939 ECU communication
Remote Start/Stop, Speed and Idle mode control via J1939
Power factor measurement for 1 phases
Selectable Resistive sender types; Pt-100, VDO, US, GM, Ford, Datcon, etc...
Speed sensing from alternator voltage or magnetic pickup
SPN, FMI and OC values reading from engines via J1939
| Features | Descriptions |
| LCD Languages | English/Chinese, English/Deutch, English/Turkish, English/Italiano, English/Espanol, English/Francais, English/Russian |
| Inputs | 3x Configurable digital, 3x Analogue senders, Magnetic Pickup, Charge Alternator D+(WL) input |
| Outputs | 6x Configurable Transistor, Mains and Generator Contactor Outputs |
| Current Measurement | 1 phases CT inputs for Load Current, 1x CT input for Earth Current |
| Voltage Measurement | 3 phases for Mains, 1 phases for Alternator |
| Case | |
| Dimensions | 111mm x 81mm x 61mm |
| Protection Class | NEMA 4X IP65 at front side |
| Operating Range | |
| DC Battery Supply range | 8 to 32Vdc, max.operating current is 360mA |
| Sender Measurement | 0 ... 1300 ohm, Accuracy: 1%FS, resolution: 1 ohm |
| Cabin.Temp.Measuremet | |
| Operating / Storage Temp. | -20°C with +70°C / -40°C with +80°C |
| Expansions | |
| Internal | Parameter configuration via RS-232 serial communication |
| GPRS | |
| Embedded WEB server | |
| Serial ModBus | |
| Approvals | CE, GOST-R |
